Partial Printing

How to Fix Partial Printing/Too Small Issue

Written by: Beichen Lu

|

|

Time to read 1 min

Partial printing means the printed outcome is too small or only part of printed outcome that shows on the label.

Reason: The main reason is that printing setup size is not size of your labels.

If the set up size is 4 x 2 but label size is 4 x 6, then pritned outcome is too small.

If the set up size is 4 x 6 but label size is 4 x 2, then printed outcome is not complete because your printer assued to print on a 4 x 6 labels instead of 4 x 2.

Solution :The solution is change you printing set up size to match the label size.

Table of Content

For Windows User: For Mac User: Brother P-Touch User (Eg. DK-1209 62mm x 29mm) Conclusion Products Featured In This Blog

For Windows User:

Go to the ‘printer preferences’ -> ‘advanced’ -> ‘paper size’, select the correct size for the printer


For Windows

For Mac User:

For Mac users, select correct size on "Paper Size" in the print dialogue. For instance, you should choose the 4 x 6" for 4 x 6 labels (eg. DK-1241 , Dymo 1744907 ). You can use the presets settings to p save these specific printing settings and avoid repeated setup.

For Mac

Brother P-Touch User (Eg. DK-1209 62mm x 29mm)

File’ -> ‘Print’ -> ‘Page Setup’, select the correct size for the printer (Eg. 62mm x 29mm for DK-1209)


Paper’ -> ‘Media Size’

Conclusion

Check Printer: If the file size is correct but still print incompletely, try to adjust your printer:

① Load no less than 4 consecutive labels into the printer.

② Press and hold FEED button, and when you hear a beep,

release the feed.

③ The printer will learn the size of the paper at this time. After the process is complete, the printer back to normal

If all above are correct but still not resolve, please email us to:cs@betckey.com 


If you want to buy thermal labels or sticker paper, you can check out more on our store

Visit our store

Products Featured In This Blog

Visit our store
← Go back