How to Replace the Brother Cutter Blade - Step-by-Step Instructions
|
|
Time to read 3 min
If you've been using a Brother label printer for a while and notice that the cuts are getting rough or the blade is becoming dull, affecting the quality of your labels, it's time to replace the cutter blade. Maybe you haven’t done this before, but it’s a simple easy process! Just follow our steps, and your label rolls will be cut smoothly in no time!
Table of Content
Tools and Materials Needed: Step-by-Step Instructions Step 1: Turn Off and Unplug the Printer Step 2: Open the Printer Cover Step 3: Lift up the cutter cover Step 4: Remove the old cutter blade Step 5: Clean the Area Step 6: install the new cutter blade Step 7: Tighten the screw Step 8: Close the cutter cover Step 9: Reinstall the label roll Step 10: turn on your label printer Tips for Maintaining Your Cutter Blade Conclusion
Tools and Materials Needed:
- Replacement cutter blade. You can buy a cutter blade online by typing the related key words and many products will pop out.
- Screwdriver (usually a Phillips head)
- Clean cloth or paper towel
Step-by-Step Instructions to Change the Brother Cutter Blade
To replace the cutter unit, follow these steps:
Step 1: Turn Off and Unplug the Printer
Turn off the printer and unplug the power cord from the electrical outlet.
Step 2: Open the Printer Cover
Open the label roll compartment cover, lift up the label lever, and remove the label roll from the compartment.
Step 3: Lift up the cutter cover
If your printer has a cutter cover, lift it up. If not, proceed to the next step.
Step 4: Remove the old cutter blade
Using a cross-head or Phillips screwdriver, loosen the screw securing the cutter unit. Note that the screw cannot be completely removed; simply loosen it to detach the cutter unit from the printer.
Step 5: Clean the Area
Use a clean cloth or paper towel to wipe away any dust or debris from the area where the cutter blade sits.
Step 6: install the new cutter blade
Align the new cutter unit with the two holes and the two posts in the machine, and press it into place.
Step 7: Tighten the screw
Tighten the screw to secure the new cutter unit.
Step 8: Close the cutter cover
If your printer has a cutter cover, close it.
Step 9: Reinstall the label roll
Reinstall the label roll and close the label roll compartment cover. Check this page to see how to load or change a label roll.
Step 10: turn on your label printer
Plug the power cord back into the electrical outlet.
Tips for Maintaining Your Cutter Blade
The cutter blade in a Brother label printer guarantees smooth and precise cuts. To prolong its lifespan, regularly clean and check the cutter blade.
Regular cleaning: Regularly clean the blade and the surrounding area to prevent dust and debris buildup. When cleaning, use soft paper to reduce wear and tear on the blade
Regular Check: Check the blade regularly for signs of wear and replace it as soon as it becomes dull or damaged.
Conclusion
Replacing the blade in your Brother printer is a straightforward process that can greatly improve the quality of your prints and extend the life of your printer. By following these steps, you can ensure your printer continues to operate smoothly and efficiently.
About us
Betckey Premium Labels is a leading supplier of compatible direct thermal labels, committed to high-quality and eco-friendly products as well as competitive pricing. Now, our Amazon store ranks first in the US, Canada, and Western Europe with thousands of positive ratings. Visit betckey.com and get 10% off purchases over $150 with code Betckey10 and 15% off over $400 with code Betckey15. Sign up now and we'll send you a $5 discount code towards your first purchase. Shop with Betckey today!
Why is my label maker not cutting?
If the label does not cut well or tape is jammed, adhesive may have built up on the blades after repeated use. To correct this problem, clean the blade by wiping the blades multi times using a dry cotton swab.
If you want to buy thermal labels or sticker paper, you can check out more on our store
